Freestyle / Wave Access Bar

Nota: the color of the bar depends on its width:

• 42 cm : red and blue
• 47 cm : yellow and blue
• 50 cm : red and blue
• 52 cm : yellow and blue
• 55 cm : red and blue
• 60 cm : red and blue
• 65 cm : yellow and blue

THE FREESTYLE WAVE CONTROL BAR : ideal for freestyling, hydrofoiling or waveriding

The FreeStyle Wave Control Bar is basically a Totem bar, except one thing: the bar ends are fixed and foamed. So, unlike the Totem, you cannot change the width between the 2 back leader lines. This bar is for hardcore riders!

42 cm FreeStyle Wave Bar

Color: Red / Blue

This is the ideal bar for kids, teenagers, or those who kite in very strong winds (such as the Tramontane, ...). Thanks to a short bar, you avoid oversteering in very strong winds with a small kite.

This bar is perfectly suited for very small kites: 2.5 m2 to 6 or even 7 m2. This is typically the ideal bar for a 5 m2 kite.

If you are a wakestyler, you are looking for a shorter bar than usual for low kite stricks. This is it.

Children will love this control bar: no over steering. The AKA 3 is shorter than most QR on the market and you can lower the clamcleat so the kid can grab the trim very easily. A 7 year old kid will be very happy!

47 cm FreeStyle Wave Bar

Color: Yellow / Blue

Typically the most popular bar for freestyling. Great for kites between 7 and 9 m2. Can be used also for 5 m2 up to 10m2, or even 12 m2.

This is also a great junior/teenager control bar.

50 cm FreeStyle Wave Bar

Color: Red / Blue

This is the most versatile bar. Many kite schools use it. Ideal for 8m2 up to 12m2 kites.

52 cm FreeStyle Wave Bar

Color: Yellow / Blue

A very popular size. Great for wave riding. Perfect for 9 to 12m2. Can be used also with smaller kites (7 m2).

55 cm FreeStyle Wave Bar

Color: Red / Blue

Ideal for kites from 11 m2 to 14 m2

60 cm FreeStyle Wave Bar

Color: Red / Blue

You want to fly a 15 or 16 m2 inflatable kite? This is the bar you need. Your kite will be more responsive.

65 cm FreeStyle Wave Bar

Color: Yellow / Blue

You kite with a very big kite: 17 or 18m? And more particular a foil kite? This is the bar you want. A wide bar will help you turn it faster. Especially if you are using 20 m, 22 m lines or even longer lines.

The universal Kite Attitude Control Bars work with all kite brands. You can use the same bar with all your kites, either 4-line kites or 5-line kites.

The bar is « ready to ride » with all kites on the market, such as: Advance, Airush, Best, Blade, B3, Bullkite, Cabrinha, Caution, Conceptair, Core, CrazyFly, DuoTone, Eclipse, Eleveight, Elf, Epic, F-One, Fluid, Flysurfer, Gaastra, Genetrix, Gin, Gong, Griffin, HB, HQ, Hyde, Kitech, Liquid Force, Naish, North, Ocean Rodeo, Ozone, Pansh, Peter Lynn, Powerkite, RRD, Slingshot, Sroka, Starkite, Storm, Supair, SwitchKite, Takoon, Zeeko ... in 4 or 5 lines. All mentionned brands are registered trademarks.

If you are unsure about the compatibility of your kite with the universal bar, please call us or email us. If you use kites such as Genetrix, 2011 Best Kahoona, older Slingshot, or kites prior to 2008, you will need to perform some slight adjustments on the universal bar.

UNIVERSAL BARS : UNSURPASSED BENEFITS

HUGE DEPOWER THROW

The universal bars provide the biggest depower throw on the market. You can handle gusty winds much better, and have more fun in the waves : just push the bar and relax !

Also, some kites bars present a slight difference in the line lengths, such as the Kahoona 2011, Genetrix or kites older than 2008. You can trim the bar to offset the kite line difference (or you can use another knot on the back leader lines : see the Questions and Answers).

To trim the kite, you can pull the handle. The handle has a velcro on it, so that you can « stick » the handle to the male velcro near the clamcleat, if you trim.

The trimming handle allows you to trim the kite (in other words, you reduce the power of the kite). Moverover, it comes with a velcro, so you can « stick » the handle near the clamcleat to the male velcro, to prevent the handle from « flying around ». And you can grab it easily at any time.

TAKE IT APART COMPLETELY – SPARE PARTS

The only control bar on the market that you can take apart completely and upgrade easily. No use to buy a new bar because one piece is worn out ! All the components of the bar are available online.

AKA SECURE QUICK RELEASER

The quick releaser allows you to release the kite easily. It is a « push away » QR. Really easy to trigger and re-hook, especially if you are in the water.

Rotating donkey dick : freestylers will love it.

The chicken loop is reinforced in the middle part, so that it keeps its shape if you unhook.

The QR has a swivel on its upper part. It really works ! You can untwist the lines.

This QR has been improved year after year and is mature. Users of older Kite Attitude bars can upgrade it for a very reasonable price.

EASY CUSTOMIZING

All the components can be replaced very easily.

The universal bar is « plug and ride ». You can connect to the kite and go riding. No need to make special adjustments. But expert riders can fine-tune the bar to their own needs.

For instance:

- HUGE DEPOWER THROW thanks to the big depower rope and the AeroCleat Clamcleat.

- You can move up or down the cleat to adjust the depower throw. Ceci est très appréciable pour les enfants, qui pourront attraper la poignée de trim plus facilement. Inversement, si vous êtes très grand, vous pouvez remonter le Clamcleat.

- You can cover the depower rope with a plastic tube (see below).

- Safety connected to one front line or both front lines

When you trigger the QR, the kite falls off and is only retained by one front line. This is the default setting. You can change it to what is called « the short fifth line ». Warning : proriders only should use the short 5th line mode. The reason is that the kite may keep more power, especially in the high wind range. Today, most kite manufacturers are pretty much giving up the short 5th line and coming back to a safety connected to one front line only.

Since all components can be replaced very easily, you can upgrade your bar and save money. So you are not compelled to purchase a totally new bar every year.

- You can connect the lines to any kite briddle on the market, because the loops contain pigtails. So if, for instance, the briddle of your kite has knots for the back lines and loops for the front lines, you can connect without any problem.

CHOOSE THE LENGTH OF YOUR KITE LINES

Choose what is best for your riding style: 19, 22, 24 meters are standard. You may also get specific length. Just ask us

If you want to be radical in the waves, go for 19 meters.

24 meter lines are best for strong/tall guys, who will get more power in the low wind range. They are best also if you want to jump higher.

22 meter lines are a great choice to ride the waves and have decent power in the low wind range.

17 and 19 meter lines are getting very popular among hydrofoil racers.

If you are unsure about the length that works best for you, go for 19 or 22 meters, and add kite line extensions. So you get the best of all worlds. Kite line extensions will bring you more power. To the point maybe where you will not purchase a bigger kite !

For instance:

- 22 meters with 7 meter extensions and a 11m2 kite will give you pretty much as much power as a 14 m2 kite.

- You will be able to ride in very light winds with a 15m2 and 7meter extensions.

The kite lines are high performance lines, real Dyneema lines, with very low stretching, from Liros, Germany. They are prestretched by the factory and after in our workshop and have pigtails at each loop end to connect either to a knot or a loop on the briddle of the kite.

« MADE IN FRANCE », DESIGN AND ASSEMBLING IN FRANCE

The bars are designed in France, the kite lines come from Europe and are sewed in France. The bars are finally assembled in France. This is why we can provide all the possible options and customization. We have all spare parts available at all times.

HIGH END COMPONENTS

We are using are the best possible components to build the Kite Attitude universal bars. Just compare each part with the competitors’s products. Look at ropes, quality of lines, quality of grip, bar centers, etc : it is at least equivalent and often better.

The bar center is molded with stainless steel : it is much stronger than CNC. Not a single bar center broke, over a production of several thousand units.

For instance :

The pulley can sustain up to 700 kg.

The chicken loop is reinforced in the middle, so that it keeps its rounded shape if you unhook.

The depower rope is 5.5 mm wide : it can sustain 2 tons. Most depower ropes on the market are only 4 mm wide, and sometimes less.

If you wonder why the depower rope is not plastic-sheathed, here is why :

1) If you want, you can cover the depower rope with shrinkable plastic tube. You can get some some tube used by electricians to do it.

2) plastic-sheathed depower ropes usually don’t slide as well as plain ropes.

3) plastic-sheathed depower ropes need be much thiner, otherwise they cannot fit into the tubes.

4) our bar center is well rounded and really wide, so the depower rope lasts longer

We have been making bars since 2009 for a number of kite brands. Thousands of riders are riding with our gear. So we have huge feedback regarding how people ride and use the bars, in many parts of the planet. In other words, we know what works in the long run in all weather conditions, and how people want to use the bars (beginners, experts, competitors…)

ANY QUESTION? CALL +33 (0)6 49 15 07 37 or contact us

Nota : the video below shows the 2015 bar (old design, no velcro handle at the time.

Great thanks to the Hanglos forum who tested the FreeStyle Wave bars last winter (7°C temperatures...)