Tutorials

This Tutorial shows you how to change the length of the back leader lines on a universal freestyle wave bar, set up with a "low V" (it means there is no front leader line, the power lines are connected right after the trim pulley). If you are riding with a Totem or Totem Vario, this tutorial is pretty much useless for you, since you can change the length very easily where the back end connectors are (below the floaters).

This tutorial explains how to setup the safety line onto a Kite Attitude universal bar. To remove the safety line, just follow the procedure in reversed order:

Pascal rides with a rope harness, a Kite Attitude universal race foil bar and the small AKA chicken loop. His harness comes from Da Kine, and he replaced the traditional stainless steel buckle with a dyneema rope. But it could be also an Engine, Ion or Mystic harness for instance. Pascal uses a friction ring to prevent wear of the rope and the chicken loop tube.

How to replace the elastics at the bar ends of the freestyle wave bars? This tutorial explains step by step how to do it. The trick is to get an iron wire to grab the elastic and pull it through the foam bar end.

... Size matters! Learn how to reduce the size of your chicken loop: download the instructions Watch the video