This line stopper is meant to stop the control bar from reaching the kite, once you have triggered the quick releaser.
It must be installed on the line connected to the safety line, which, in turn, is connected to the leash.
Advertencia: ¡Últimos artículos en inventario!
In order to install this line stopper, you must uninstall the safety line. To do so, follow these instructions:
Once you have removed the safety line, you must insert the small transparent tube and the line stopper onto the power line connected (the one that is connected to the safety line). To do so, you need a 2.5mm Allen key (same as FCS fins).
First, do not tighten the screw "like crazy", otherwise you might damage the kite line. We waive all responsibilities if your kite line break. Be gentle when screwing!!!
You need to install the line stopper at least 15 meters away from the control bar, otherwise the control bar might hit the line stopper very very strongly and potentially damage the line, to a point where the kite line might break.